AUTOTERM PLANAR - 8DM - 12, Руководство по эксплуатации

Страница: 34 / 50

ENG PLANAR-8DM-12/24
6 Control panel ПУ -8 functions
6.1 The control panel is intended for:
- heater activation and deactivation in manual mode;
- setting operation mode according to desired power or temperature;
- display of the set temperature or power;
- heater temperature indication from one of three sensors (from the sensor integrated in
the heater, control panel unit or external sensor if connected);
- failure code indication in case of heater failure while operation.
The front board of the panel contains: four-digit light emitting diode (LED) indicator,
two LEDs and three knobs. Functionality of the knobs and LEDs. (figure.6.1)
LED indicator N1
(temperature mode)
(power mode)
LED indicator N2
mode selecting/decreasing
of power or temperature
Sensor selecting/increasing of
power or temperature
Setting of operation mode/heater
ON-OFF knob
12
Cabin temperature sensor
(if connected)
Heater temperature
sensor
Control panel
temperature sensor
LED indicator N1
(temperature mode)
(power mode)
LED indicator N2
mode selecting/decreasing
of power or temperature
Sensor selecting/increasing of
power or temperature
Setting of operation mode/heater
ON-OFF knob
12
Cabin temperature sensor
(if connected)
Heater temperature
sensor
Control panel
temperature sensor
Figure 6.1- Control panel
While first time the heater is connected to electric circuit of the car the temperature in
the area where the sensor installed will be shown. If the temperature in the sensor’s area is
under zero, there will be «mines» before the figure.(figure 6.2)
12 12
Figure 6.2- View of the indicator after connection to electric circuit of the heater (initial
stage of the indicator)
9