1/17/03
1
POOL PILOT
SOFT TOUCH
OPERATING,
TROUBLESHOOTING AND TECHNICAL CHEAT SHEET
NORMAL OPERATING MODE OF SOFT TOUCH
1. Output Lights will pulsate to indicate Chlorine production.
a. There are 7 lights to indicate output level.
b. Chlorine Production is based upon an on/off period of a 30-minute cycle.
c. If lights are solid Green this means unit is in rest mode.
d.
To increase percentage of chlorine production, press UP ARROW
e.
To decrease percentage of chlorine production, press DOWN ARROW
(The lights will display between 1 light up to 7 lights to reflect output level)
2. Flow Light will be
Green
a. If Flow light is not on see troubleshooting section.
3. Salt Light will be
Green (OK)
– unit will produce chlorine
4. If Salt light is
Yellow (LOW)
add salt until Green Salt light comes on or check with Salt
addition chart for proper amount
i. The Yellow Salt light comes on at 2500 ppm and unit will still produce chlorine.
5.
If Salt light is
Red (ADD)
---unit will engage safety cell shut off. Unit will automatically
resume operation when salt is added back to sufficient levels
.
i. The Red Salt light comes on below 2000 ppm of salt.
6. Pushing the
BOOST BUTTON
will increase chlorine production to 100% for 24 hours of
accumulative pump run time.
The GREEN BOOST LIGHT
will stay Solid Green
a.
Holding the Boost Button down from Boost OFF mode for 8 seconds will increase the
Boost Cycle to 72 hours of accumulative pump run time.
The Green Boost light will
flash
b. After Boost Cycle is complete the unit automatically reverts to the original Setting
c. Depress the Boost button in either Boost mode to deactivate Boost mode.
.
Содержание POOL PILOT SOFT TOUCH
Страница 6: ...1 17 03 6...
