10.2 Adding Enclosures
You can expand the switching capabilities of an 8Y-XL by adding
enclosures. Whenever you add hardware to an 8Y-XL you must update
the system’s configuration information by uploading a new configuration
file. A new configuration file, link cables, and other system products are
provided with the new enclosure(s).
When attaching signals, follow the AutoPatch “8Y-XL Connector and
Groupings Guide” included with the new enclosure; all information
specific to the system is on or with that sheet.
To add an enclosure:
Warning:
To avoid ESD (Electrostatic Discharge) damage to sensitive
components, make sure you are properly grounded (see the
Caution
page
inside front cover) before handling any internal 8Y-XL materials.
1. Although it is not necessary to turn all the enclosures in the system
off, we suggest doing so unless current operations will be disturbed.
2. Link the new enclosure to the other enclosures. See Chapter 3,
“Linking Enclosures,” for more information about linking enclosures.
3. Following the new AutoPatch 8Y-XL Connector and Groupings
Guide, attach all inputs and outputs. See Chapter 4, “Attaching Inputs
and Outputs” for more information about attaching inputs and
outputs.
4. Turn on all the enclosures in the system. The 8Y-XL goes through its
startup sequence.
Installation and Setup Guide
10-5
Adding Enclosures
Hardware
