Installation and Setup Guide
8-7
Configuring Local Presets
To modify presets:
1. In the Manage Local Presets dialog box, click the Modify Preset
button.
The Modify Preset dialog box opens.
2. Select any of the following field or button options.
3. When done, click OK to return to the Manage Local Presets dialog
box.
ä
Name
(modify preset name) by typing a new name (eight character
limit) in the Name edit field that is not an existing preset name.
ä
Assign Switch
by selecting one available source channel and one or
more available destination channels (multiple select by holding
down the control key).
Click the Assign Switch button.
The assignment will appear in the Assignment column of the
Destination Channels list.
ä
Clear Source
by selecting a source channel that you want to clear.
Click the Clear Source button.
All instances of the selected source will be cleared from the
Assignment column of the Destination Channels list.
ä
Clear Destination
by selecting a destination channel(s) (multiple
select by holding down the control key) that you want to clear.
Click the Clear Destination button.
The Source Channel(s) assigned to the destination(s) will be cleared
from the Assignment column in the Destination Channels list.
ä
Disconnect
by selecting either a source channel or one or more
destination channels to be disconnected.
Click the Disconnect button.
Current source and destination disconnects are displayed in the
Disconnected Channels list on their respective sides of the Modify
Preset dialog box.
Caution:
Disconnecting an input affects all outputs that the input is
connected to whether they are part of this preset or not.
Note:
During a source disconnect, all previous assignments for that
source are cleared from the Assignment column of the Destination
Channels list.
Configuration
Files
