and 100 strings. The strings can recur in intervals of one sec-
ond to one year.
Note:
AutoRoute Event Scheduler can only be run on a PC
that uses RS-232 communications; see figures 4.13 -
4.17 in section 4.4.1, “Attaching an External Control-
ler.”
4.7.4
ScanPatch
ScanPatch is a DOS-based control program that cycles I/O
configurations. Each output has a set of assigned inputs that
are cycled through it. Each ScanPatch session can handle up
to 128 outputs, with a set of inputs for each output. Each set
can contain no more than 40 inputs. The length of a Scan-
Patch session can be predefined or you can let it run until you
need or want to terminate it.
Note:
ScanPatch can only be run on a PC that uses RS-232
communications; see figures 4.13 - 4.17 in section
4.4.1, “Attaching an External Controller.”
4-22
Chapter 4
