Autonics TM Series, Руководство пользователя

Страница: 88 / 98

6 Parameter Settings and Functions
88 © Copyright Reserved Autonics Co., Ltd.
DI-1 DI-2 Multi SV No.
OFF OFF SV-0
ON OFF SV-1
OFF ON SV-2
ON ON SV-3
Group Parameter Range
Factory
Default
Unit
Option Setting Group
(Digital Input Setting)
Digital Input 1
Function
OFF, STOP, AL-
RESET
Manual, Multi-SV
STOP -
Digital Input 2
Function
AL-RESET -
Multi SV parameter will be activated only if Multi SV is more than 2.
6.6.4.2 Digital Input Terminal Target Channel
Users can set a target channel to which digital input terminal function will be applied.
Group Parameter Range
Factory
Default
Unit
Option Setting Group
(Digital Input Setting)
Digital Input1_Ch
CH1, CH2
CH1 -
Digital Input2_Ch CH2 -
6.6.5 Error Detection

The controller diagnoses input signals for errors and displays messages accordingly.
These messages inform the user of device problems.

The following conditions may result in errors. When an error occurs, the display LED
at the front flashes at 0.5 second intervals.

The sensor input is higher than operational temperature range.

The sensor input is lower than operational temperature range.

Input sensor is disconnected or not connected.

Once the cause of the error is solved (sensor connected/return to display range), the
error status is released and the device continues to run normally.