background image

A-142

BL Series

 

Dimensions

 

Installation

(unit: mm)

● If installing this unit at an opaque pipe, it is impossible to 

detect accurately. Install this unit at the rated pipe.

● Fix a pipe and this sensor tightly with binding bands and 

anti-slip tubes as the below figure and cut the spare part 

of binding bands with scissors or a knife.

● When connecting binding bands, be careful not to 

transform a pipe.

Pipe

Principle of operation

It detects whether there is liquid or not in a pipe by 

refractive index of light. 

Liquid

 

Emitter

Receiver

Emitter

Receiver

Anti-slip 

tube

Binding band

     

 (max. 2.5mm width)

Liquid

 

If installing this unit at opaque pipes, it is impossible to detect accurately. Install this unit at the rated pipes.

Using binding band: Ø6 to 13mm, Using protection bracket: Ø12.7mm (1/2 inch)

◎ 

Protection bracket (BK-BL13-P(sold separately))

◎ 

Protection bracket (sold separately)

Choose a location on the pipe and attach the sensor and 

the protection bracket. 

Sensor

Pipe: Ø12.7mm (1/2 inch)

Protection 

bracekt

For using the protection bracket, only Ø12.7mm (1/2 inch) pipes are available.

Ø13

Operation mode 

switching button

Operation mode indicator(green)

Operation indicator

(red)

14

Ø2.5, 1m

13

Opticlal 

axis

23

6

Ø34

27.4

8.5

2.4

2

10.8

2.5

17

Ø15.7

Ø12.7

26.4

28.4

Ø15

Ø16.7

Содержание BL Series

Страница 1: ...PN or PNP open collector output Load voltage max 30VDC Load current max 100mA Residual voltage max 1VDC Protection circuit Reverse polarity protection circuit output short overcurrent protection circuit Indicator Operation indicator red LED operation mode indicator green LED Insulation resistance Over 20MΩ at 500VDC megger Noise immunity 240V the square wave noise pulse width 1 by the noise simula...

Страница 2: ...ved light Received light Interrupted light Interrupted light Stable light ON area Unstable operation level Stable light OFF area Incident light level High Low Operation indicator red LED Transistor output The waveforms of Operation indicator and Transistor output are for Light ON it is operated as reverse in Dark ON If short circuit the control output terminal or supply current over the rated spec...

Страница 3: ...Emitter Receiver Anti slip tube Binding band max 2 5mm width Liquid If installing this unit at opaque pipes it is impossible to detect accurately Install this unit at the rated pipes Using binding band Ø6 to 13mm Using protection bracket Ø12 7mm 1 2 inch Protection bracket BK BL13 P sold separately Protection bracket sold separately Choose a location on the pipe and attach the sensor and the prote...

Страница 4: ...nctions Operation mode switching Operation mode lock setting Light ON Operation mode indicator green LED ON Press operation mode switching button once Dark ON 3 sec Operation mode indicator green LED OFF Lock operation mode Unlock operation mode Press operation mode switching button for over 3 sec until operation mode indicator flashes If you press the operation mode switching button less than 3 s...

Отзывы: