www.autometers.co.uk
8
From the set-up menu, use and buttons to select the system
option. The screen will show the currently selected power supply.
Press to enter the selection routine. The current selection will flash.
Use and buttons to select the required system option:
1P2(W),3P3(W) ,3P4(W).
Press to confirm the selection. SET indicator will appear.
Press to exit the system selection routine and return to the menu.
SET will disappear and you will be returned to the main set-up Menu.
From the set-up menu, use and buttons to select the Pulse
Output option.
(It shows 1 impulse = 10kWh/kVArh)
From the set-up menu, use and buttons to select the Pulse
Rate option.
Press to enter the selection routine. The current setting will flash.
0.01/0.1/1/10/100kWh/kVArh per pulse.
Use and buttons to choose pulse rate. On completion of the
entry procedure, press to confirm the setting and press to
return to the main set up menu.
Press to enter the selection routine. The unit symbol will flash.
Use and buttons to choose kWh or kVArh.
On completion of the entry procedure, press to confirm the setting
and press to return to the main set up menu.
4.5 Supply System
The unit has a default setting of 3Phase 4wire (3P4).
Use this section to set the type of
electrical system.
4.6 Pulse Output
4.6.1 Pulse Rate
This option allows you to configure the pulse output. The output can be set to provide a
pulse for a defined amount of energy active or reactive. Use this section to set up the
pulse output—Units: kWh, kVArh
Use this to set the energy represented by each pulse. Rate can be set to 1 pulse per
0.01kWh / 0.1kWh / 1kWh / 10kWh / 100kWh.
V/A
ESC
V/A
ESC
V/A
ESC
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
E
E
E
E
E
E
