2
Tech Support 770-844-4200
www.productivity2000.com
General Specifications
Operating Temperature
0º to 60ºC (32º to 140ºF)
Storage Temperature
-20º to 70ºC (-4º to 158ºF)
Humidity
5 to 95% (non-condensing)
Altitude
2,000 meters max
Pollution Degree
2
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1800VAC applied for 1 second
Insulation Resistance
> 10MΩ @ 500VDC
Heat Dissipation
1200mW
Overvoltage Category
II
Enclosure Type
Open Equipment
Module Keying to Backplane Electronic
Module Location
Any I/O slot in a Productivity2000 System
Field Wiring
Use
ZIP
Link Wiring System or removable terminal block (not
included). See “Wiring Options” on page 5.
Connector Type (not included) 18-position removable terminal block
Weight
90g (3.2 oz)
Agency Approvals
UL 61010-1 and UL 61010-2-201 File E139594, Canada and USA
CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-2-201 Safety)*
Input Specifications
Input Channel
4
Input Ranges
0–20 mA
Signal Resolution
16-bit
Resolution Value of LSB
(least significant bit)
0–20 mA = 0.305 μA per count
(1 LSB = 1 count)
Data Range
0 to 65535 counts
Input Type
Sinking, Single-ended (1 common)
Maximum Continuous Overload
±31mA
Input Impedance
250Ω ±0.1% 1/4 W
Hardware Filter Characteristics
Low Pass, -3dB @ 100Hz
Sample Duration Time
9ms per channel
(does not include ladder scan time)
All Channel Update Rate
80ms
Open Circuit Detection Time
Zero reading within 1s
Conversion Method
Successive approximation
Accuracy vs. Temperature
±25PPM / ºC maximum
Maximum Inaccuracy
0.1% of range
(including temperature drift)
Linearity Error
±0.015% of range
Monotonic with no missing codes
Input Stability and Repeatability
±0.015% of range (after 10 min warmup)
Maximum Full Scale Calibration Error
±0.015% of range maximum
Offset Calibration Error
±0.015% of range maximum
Maximum Crosstalk at DC, 50Hz and 60Hz -76dB, ±10 LSB
Recommended Fuse (external)
Edison S500-32-R, 0.032A fuse
External Power Supply Required
24VDC (-20% / +25%) 35mA
*Meets EMC and Safety requirements. See the D.O.C. for details.
