Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
1–29
Chapter 1: Getting Started
Step 9: Write Project to the Do-more T1H Series PLC
Now that you have created the example ladder logic program, you can write the program to
the PLC. To do so, click the Write PLC button in the Project Toolbar.
If the Write PLC button is not active, then you must first connect to the PLC to activate
the online portion of the Project Toolbar (see the “Establish Communication” section of
this chapter). If you have altered the System Configuration, which includes the hardware
configuration, in any way, then the PLC must be taken out of Run mode in order to process
the download.
Step 8: Save a Project
Save the project by selecting (a) Save Project (Ctrl+S) from the File drop down menu. Or
save the file under a different name or in a different location by selecting the (b) Save Project
As... option.
