Do-more T1H Series PLC Hardware User Manual, 1st Edition, Rev. C
1–16
Chapter 1: Getting Started
Now select the New Online button and the Online dialog box, seen below, will open. From
this dialog, you are given available communications links to choose from with options to add,
edit disable/enable, or delete links.
Choose the appropriate link, select OK
and the software will connect to the
Do-more T1H Series PLC. If the mode
selector switch on the CPU module is not
in the Term position when connecting, the
warning shown below will appear.
You are allowed to continue if you wish or place
the mode selector switch on the CPU module
in the Term position to avoid any unintended
communication errors.
If you were connecting to the CPU module with a project created offline, you may encounter
the message window shown here.
