manualshive.com logo in svg

Automationdirect.com Stride SIOL-EI8B, Руководство пользователя

Поделиться
Скачать
Automationdirect.com Stride SIOL-EI8B Скачать руководство пользователя страница 80

SIOL-EI8B-USER-M

71

Web Server (WebUI)

Powered by

Version 1, May 2022

10.2.2.  PARAMETERS menu

The “Parameters” menu item contains the following subitems, which are read-only:

 

◼

Diagnostic configuration

 

◼

IO layout for digital channels

Fig. 10-5: Menu item “Parameters”.

10.2.3.  DIAGNOSTICS menu

The “Diagnostics” menu item shows the incoming and outgoing alarms of the master.
The menu shows an overview of diagnostic messages.
Depending on the setting in the “Please select an entry” drop-down menu, the following diagnostics of the 

module are displayed:

 

◼

Active

 

🗸

All diagnostics pending at the time of the WebUI call.

 

🗸

All diagnostics that are no longer active are not displayed.

 

◼

History

 

🗸

All diagnostics that are no longer active are placed in the diagnostic memory log and are displayed.

 

🗸

The module can hold up to 40 historical diagnostic entries. The most recent diagnostic entry 

overwrites the oldest one in the memory.

Содержание Stride SIOL-EI8B






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды