In
st
al
la
tio
n
an
d
S
pe
ci
fic
at
io
ns
2--4
Installation and Specifications
Power Supply Connections
OP400 series panels r5 VDC input power. An optional 5 VDC external power
supply that plugs into a standard 120 VAC receptacle is available (part no.
OP--PS400). This power supply (or equivalent) is required for configuring your
panel. The power supply is also required for operation
unless
you are using a DL05,
DL105, DL205 or DL405 PLC (these products supply 5VDC through the
communications cable). All other PLCs, including DL305 and Allen-Bradley 5/03,
5/04 and Micrologix, require the use of an external 5VDC power supply during
operation.
NOTE:
Only use a 5 VDC power supply that has a
center negative
DC power jack.
Configuration:
5 VDC Power Supply Required For
All
400 series panels
5 VDC Power Supply
(Part No. OP--PS400)
OP--CCBL Configuration
Cable
Operation Using a D3--330 w/DCU, D3--340, D3--350, bottom port of
DL405, or Allen-Bradley CPU:
5 VDC Power Supply Required
Operation Using a DL05, DL105, DL205, or top port of DL405 CPU:
5 VDC Power Supply Not Required
Communications Cable
Supplies 5 VDC Input Power
StockCheck.com
