13
DataWorx WinPLC
4.0 Think & Do
In order for DataWorx WinPLC to receive data from the
WinPLC, it is necessary to configure the WinPLC Think
& Do project to send network commands to DataWorx
WinPLC. The following are instructions for configuration:
(For Think & Do Version 5.4)
NOTE:
The following screen shots are for Think & Do Version 5.4.
If you are using another version, the screens may be slightly
different, but the underlying functionality will remain the same.
In the project center click on the IOView icon or
go to menu TOOLS -> IOView
In I/O View
go to menu DRIVERS -> ADD…
The following prompt for the I/O driver will appear.
Select PEER TO PEER TAG LINK DRIVER
