Automatic Technology Axess Pro 1505 Скачать руководство пользователя страница 12

Страница: 12 / 32

Axess

Pro 1505

Installation Instructions

In order to use a transmitter to set the limits, it must first have at least

one of its buttons coded to the logic console. The function assigned

to the transmitter’s buttons is of no concern here as the buttons are

temporally assigned to OPEN, CLOSE and SET (

Fig. 9.2

9.1 Code A Transmitter For Limit Setting

a. Press NEXT to navigate to Menu 1.

b. Press SET to enter the code set procedure (

Fig. 9.1

9.2 Storing Transmitter Code

a. The logic console will prompt to press one of the transmitter’s

button.

b. Press the transmitter button you wish to use to operate the opener

(e.g. button 1) .

c. Press the same transmitter button again as prompted by the

display.

d. Press the SET button to store the transmitter.

9.3 Navigating To “Set Door Travel Menu”

a. Press PREV to navigate to Menu 10.

b. Press SET to display MENU 10.1.

c. Press SET two times to enter the limit setting procedure. The close

blue LED will start to flash.

9.4 Setting Limits Via Transmitter

a. Press and hold Button 4 on the transmitter to close the Door.

i. If the Door opens, release button 4 and press the STOP button

once on the logic console to change the direction of the motor.

Then press and hold Button 4 on the transmitter to close the

Door.

ii. If the Door is closed too far, press Button 1 to “inch” the Door

towards open.

b. When happy with the close limit position, press Button 2 to store

this in the memory. The open green LED will starts to flash. Press

Button 1 to open the Door.

i. If the Door is opened too far, press Button 4 to “inch” the Door

closed.

WARNING: The Door will automatically close and open

once the next step is performed. Ensure that no persons

or objects are in the path of the Door.

c. When you are happy with the open limit position, press Button 2 on

the transmitter to store into memory. The

Door

will now automatically

close and open to calculate the travel times and other settings.

d. After this, if PE Beams are installed, then the opener can be

operated with the OPEN or CLOSE button on the logic console or

from the transmitter. Otherwise, the controller will be loaded with

“Safety Close Mode”. (Section 13.1)

9. Setting Limits via Transmitter

Button 1

(Inch Open)

Button 4

(Inch Close)

Button 2

(Set)

MENU 1
Code Transmitter

PR E S S

Coding

Button

Fig 9.1

Fig 9.2

IMPORTANT NOTE:

Only TrioCode

128 Technology Transmitters

are compatible with the Axess

Pro 1505

product.

9.5 To Recalculate Travel Times

Reprofiling is a simplified way of re-learning the travel characteristic of a previously setup Limit Switch travel installation.

Re-profiling can be used when the travel characteristics of the Door change due to mechanical adjustments etc.

a. To initiate a re-profile, locate “MENU 10.2 Reprofile Travel”

b. Press SET and follow the prompts.

The Door will start to move and re-calculate force margins. The Door can move between the open and close

limit positions up to two (2) times (depending on the position of the Door and the power up condition).

A single beep will be heard once the process is complete.

Содержание Axess Pro 1505

































Результаты поиска

Содержание Axess Pro 1505

Отзывы:

Похожие инструкции для Axess Pro 1505

Бренды по названию

Популярные бренды

Automatic Technology Axess Pro 1505, Руководство по установке

Результаты поиска

Содержание Axess Pro 1505

Отзывы:

Похожие инструкции для Axess Pro 1505

Бренды по названию

Популярные бренды