Automatic Products PREMIER 937 SATELLITE, Руководство по установке и настройке

Страница: 25 / 49

Programming
937 Series 0208 4.06
Mode 5-3 – Check Motor Scan
Mode 5-3 is used to verify the state of the selection
motors in the Satellite. To access this mode, press
the Service Switch 5 times, then press
3 on the
selection keypad the display will show the results of
the last Motor Scan Test. Press the
* key to scroll
through the results.
To initiate a new scan of the motors Press the
1 key.
The display will say Scanning Motors when
completed the display will say Scanning motors
done press
* to continue. Press the * key to scroll
through the results.
Mode 5-3 – Check Motor Scan
Initial Screen
CHECK MOTOR SCAN
Mode 5-3 – Check Motor Scan
Field A is the number of motors reporting as good.
MOTOR SCAN RESULTS
GOOD MOTORS: XX
Field A
Mode 5-3 – Check Motor Scan
Field A
is the number of motors reported as missing.
MOTOR SCAN RESULTS
MISSING MOTORS: XX
Field A
Mode 5-3 – Check Motor Scan
Field A is the number of motors reporting as
MOTOR SCAN RESULTS
BAD MOTORS: XX
Field A
V2.3