Automatic Products PREMIER 937 SATELLITE, Руководство по установке и настройке

Страница: 19 / 49

Components
937 Series 0208 3.01
High Efficiency Lighting System
Energy Star ballast & T5 bulb provide increased
lighting, exceptional light distribution, and present
products in their true, vibrant colors.
Main Product Shelves
There are either five or six main product shelves per
machine. Each selection has its own motor
mounted to the back of the shelf. Every shelf has its
own harness and plug for connecting to the
remainder of the circuit through the cabinet
receptacle, located in the rear right of the cabinet.
The motors are the same on either shelf. It is
possible to exchange a five selection shelf with a ten
selection shelf or visa versa. You also have the
capability to gain one inch either up or down on any
shelf. To do this the shelf should be removed and
the cabinet back harness receptacle lowered or
raised along with the right & left shelf tracks.
Note
♦
When exchanging the shelves, you will not need
any parts but you will have to reprogram the
machines prices.
Delivery Bin
This is located below the display window on the door
and is mechanically operated. Should the door
become difficult to operate, place a small amount of
grease on the arm tracks.
Vend Motors
The vend motors used in the 937 Series machines
have been specifically developed to operate with the
AP Control System. One primary difference that
distinguishes the new motors from previous motors
is the presence of an eight sided star at the drive
hub of the motor. This permits the stopping position
of the spiral to be customized by the operator to
ensure the best possible delivery of product. Motors
are of the fast trac style, with all electronics required
to correctly operate the motor contained inside the
gear case or the motor housing and no external
control board. Each of the motors used with the 937
Control System will have two terminals. The two
terminals continue to be used to identify the shelf
and column (selection) to be vended.
Each motor requires two wires to operate correctly.
These wires are: shelf common, and selection.
Each selection on a shelf will have the same
common shelf wire - all shelf harness use wire #12
as a shelf common. This corresponds to the
selected shelf wire in the cabinet harness. The
terminal for the shelf common in the harness is the
smaller of the two.
Selection numbers are assigned from left to right,
starting with selection 0. Each selections number
corresponds to the number of the wire for that
selection.
Selection numbers in the 937 Series Machines
support a three digit selection system. The first digit
indicates the cabinet number, the second digit is the
shelf number and the third digit is the selection
number on that shelf.
Part # Case Color code Description
360275 1/2 blue, 1/2 white, 8 point
star drive CW food/Snack
motor
360276 1/2 blue, 1/2 grey, 8 point
star drive CCW Food/Snack
motor
Shelf 21
Shelf 22
Shelf 23
Shelf 24
Shelf 25
Shelf 26
Figure 14: Shelf numbering guide.
937 Motor Part Number Chart
O O O O O O O O O O
0 1 2 3 4 5 6 7 8 9 Selection Wire Number
12 12 12 12 12 12 12 12 12 12 Shelf Common Number
937 SHELF WIRING DIAGRAM
V2.3