background image

3

General info

The user must be instructed concerning the use and operation of his heating system, in particular: 
•  Deliver these instructions to the user, as well as other documents concerning the appliance inserted in the 

envelope inside the packaging. 

The user must keep this documentation safe for future consultation

•  Inform the user about the importance of the air vents and the fl ue gas exhaust system, highlighting their 

essential features and the absolute prohibition of modifying them. 

•  Inform the user concerning controlling the system's water pressure as well as operations to restore it. 

•  Inform the user concerning correct temperature control, control units/thermostats and radiators for saving 

energy.

•  Remember that the system must receive regular maintenance at least once a year and a combustion analysis 

must be performed in the timetable foreseen by standards in force.

•  Should the appliance be sold or transferred to a new owner or if you move and leave the appliance, always 

make sure that the instruction booklet accompanies it in order to be consulted by the new owner and/or 
installer. 

The manufacturer will not be held liable in case of damage to persons, animals or objects resulting from 
failure to comply with the instructions contained in this manual.

4 -  INFORMATION PROVIDED TO THE USER 
 

BY THE INSTALLATION/MAINTENANCE TECHNICIAN

5 -  SAFETY WARNINGS

ATTENTION!
The appliance must be installed, adjusted and maintained by professionally qualifi ed personnel, in compliance 
with standards and provisions in force. Incorrect installation can cause damage to persons, animals and 
objects for which the manufacturer cannot be held responsible.

DANGER!
NEVER attempt performing maintenance or repairs on the boiler on your own initiative. 
Any work must be done by professionally qualifi ed personnel authorised by Firex. We recommend stipulating 
a maintenance contract.
Insuffi cient or irregular maintenance can jeopardise the operating safety of the appliance and cause damage 
to persons, animals and objects for which the manufacturer cannot be held responsible.

Modifying parts connected to appliance

Do not modify the following parts: 
- the 

boiler 

the gas, air, water and electricity lines 

- the 

fl ue gas pipe, safety valve and heating water drain pipe 

the construction parts which affect the operating safety of the appliance.

Smell of gas

Should a smell of gas be perceived, follow these safety guidelines: 
-   do not turn electric switches on or off 
-   do not smoke 
-   do not use the telephone 
-   close the gas shut-off valve 
-   air out the area where the gas leakage has occurred 
-   inform the gas supplier or a company specialised in installation and maintenance of heating systems.

Explosive and easily fl ammable substances

Do not use or store explosive or easily fl ammable materials (e.g. petrol, paints, paper) in the room where the 
appliance is installed.

Содержание Firex 34













Отзывы: