Make sure the drawbar and the tool holders
are tightened to the proper cutting
conditions before actual cutting operations
begin.
Safety Aspects Related To
Maintenance
Always
disconnect the power to the
machine before carrying out any
maintenance work.
After the power has been switched off for a
minimum of 60 minutes, check voltage with
a multi-meter or equivalent meter to make
sure there is no residual voltage.
Maintenance of electrical and mechanical
components should only be carried out by
individuals with working knowledge of the
machine tool.
DO NOT
remove or modify switches.
Clean the machine areas after maintenance
is completed.
DO NOT
use compressed air to clean the
machines.
Safety Aspects Related To The
Workplace
Always
provide sufficient work space
around the machine and peripheral
equipment.
Protect all cables from being damaged by
cutting chips.
