Automate 5204A, Руководство пользователя

Страница: 9 / 21

6 © 2012 Directed. All rights reserved.
4 or 5 fault tones play to alert of the report.
Trunk Release
Press
and
hold
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The Aux LED and tones play to confirm.
Remote Start
Press
and release
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn On and the Remote start LED and On tones play,
or the engine and parking lights turn Off and the Remote start LED and
Off tones play to confirm. If a Remote start configuration issue prevents
the engine from starting, a fault tone will play while the parking lights
flash a Remote Start fault report*** to identify the fault.
Key Takeover
When you are ready to drive
The system keeps the engine running until the vehicle is ready to
be driven. To perform Key Takeover:
1.
Disarm
the system and
enter
the vehicle, do not step on the
foot brake.
2.
Insert
the key,
turn
it to the run position, and then
step
on the
foot brake, the remote start then turns off.
3. The parking lights turn off to indicate remote start is off.
4. The vehicle is ready to drive.
Note: Some Push-to-start vehicles do not offer the key takeover