AUTOLIFT SP1400, Инструкция по эксплуатации

Страница: 16 / 45

INSTALLATION
7
WHEELCHAIR LIFT
DEVICE
SP 1400
MODEL
16
7.4 HANDLING
The packaged lift must be handled by a pallet truck, forklift
truck or similar.
The method used for safe handling must have a load
capacity suited to the load to be transported (see weight
indicated in the Technical Data table).
HANDLING STAFF MUST WEAR: SAFETY SHOES WITH STEEL TOE
CAP AND NON-SLIP SOLES.
MAKE SURE THAT NO UNAUTHORISED PERSONS ARE STANDING
WITHIN THE RADIUS OF ACTION OF THE LIFTING/HANDLING
EQUIPMENT (FORKLIFT TRUCK, PALLET TRUCK ETC.) DURING THE
LIFTING, TRANSPORT AND HANDLING OPERATIONS.
If a cardboard box has been used for packaging, to unpack the lift, cut the cardboard packaging with a
Stanley knife (max. blade length 1 cm) on the 4 sides of the base of the packaging, then lift and remove.
Otherwise, if a wooden crate has been used, remove the nails from the wooden crate starting from the top
and then remove the side walls.
STAFF REMOVING THE PACKAGING MUST WEAR: SAFETY SHOES
WITH STEEL TOE CAP AND NON-SLIP SOLES AND GLOVES.
7.5 INSTALLATION ON A VEHICLE
Installation on a vehicle must be performed exclusively by authorised installers.
Autolift shall bear no liability for injury or damage to property or the machine itself due
to installation on a vehicle not performed by authorised persons.