AUTOLIFT SP1400, Инструкция по эксплуатации

Страница: 17 / 45

USE
8
WHEELCHAIR LIFT
DEVICE
SP 1400
MODEL
17
8.1 NORMAL USE
The electro-hydraulic lift control is a wired portable remote control known as push-button control panel,
equipped with two rectangular dual-command buttons.
There are raised symbols on the buttons corresponding to each of the four control functions.
Specific movements of the lift, described below, correspond to each press of a button.
BEFORE USE, READ AND FOLLOW THE INSTRUCTIONS IN CHAPTER
1.7 OF THIS MANUAL.
8.1.2 HOW TO GET INTO THE VEHICLE
1.
Press “OUT” to extract the platform from the housing. Hold the button down until the platform stops
automatically;
2. Manually open the front platform, the 2 handles (if available) and the rear flap.
3.
Press the “Down” button until the platform reaches the ground and the
front flap opens fully.
4. The wheelchair user must now move their wheelchair onto the platform, position themselves in the
centre and lock the wheelchair brakes
5.
Press the “LIFT” button until the vehicle’s floor level is reached;
6. The wheelchair user must now release the wheelchair brakes and enter the vehicle, completely
leaving the platform
7. Manually close the rear flap, the handles (if available) and the front platform.
8.
Press the “IN” button; the platform is lowered and automatically returned inside its housing.
LIFT
LOWER
OUT
IN