background image

TJ250       

   04 

Operation 

The owner and/ or operator shall 
have an understanding of the 
product, its operating characteristics 
and safety operating instructions 
before operating this device.

Safety information shall be 
emphasized and understood. If the 
operator is not fluent in English, the 
product and safety instructions shall 
be read to and discussed with the 
operator in the operator’s native 
language by the purchaser/owner or 
his designee, making sure that the 
operator comprehends their contents. 

Inspection 

a. Visual inspection shall be made 

before each use of the jack by 
checking for abnormal 
conditions, such as cracked 
welds, leaks, and damaged, 
loose, or missing parts.

b. Other inspections shall be made 

as per product operating 
instructions.

c. This jack should be inspected 

immediately if the jack is 
believed to have been subject to 
an abnormal load or shock. It is 
recommended that this 
inspection be made by a 
manufacturer’s or supplier’s 
authorised repair facility.

d.  Owners and/or operators should be

made aware that the repair of this 
equipment may require specialised 
knowledge and facilities. It is 
recommended that an annual 
inspection of the product be made 
by a manufacturer’s or supplier’s 
authorised repair facility and that 
any defective parts, safety labels or 
signs be replaced with 
manufacturers or supplier’s specified 
parts.

Damaged Equipment 

Any jack that appears to be damaged 
in any way, is found to be worn, or 
operates abnormally 

must be 

removed from service until repaired.

  

It is recommended that necessary 
repairs are to be made by a 
manufacturer’s or supplier’s authorised 
repair facility, if repairs are permitted by 
the manufacturer or supplier. 

Alterations 

Due to the potential hazards 
associated with this type of equipment, 
no alterations shall be made to the 
product. 

Attachments & Adapters. 

Only attachments and/or adapters 
supplied by the manufacturer shall be 
used. 

Содержание TJ250














Отзывы: