background image

TJ250       

    02 

SAFETY PRECAUTIONS 

DANGER:

 Use the jack for lifting only, NOT for supporting the lifted 

load.

 

-

Use suitable capacity 

 

 

axle stands under the vehicle before

proceeding with any task.

-

Ensure there are no persons or obstructions beneath the vehicle

before lowering.

-

DO NOT

 operate the jack if damaged.

-

DO NOT

 work under the vehicle until axle stands have been

correctly positioned.

-

DO NOT

 exceed the rated capacity of the jack (3.0tonne).

When lifting a load of maximum capacity or close to it, it is
recommended that the effort be reduced by the use of
assistance during this operation.

-

DO NOT

 adjust the safety overload valve.

-

DO NOT

 jack vehicle if there is a risk of spillage of fuel,

battery acid, or other dangerous substances.

-

DO NOT

 allow the vehicle to move while supported by the

jack, or use the jack to move the vehicle.

-

DO NOT

 top up the hydraulic system with brake fluid. Use

hydraulic jack oil only and use a qualified person to maintain
jack hydraulic system.

-

DO NOT

 allow untrained persons to operate the jack and DO

NOT use the jack for purposes other than which it is designed.

-

DO NOT

 allow persons to ride on the jack.

-

When not in use store the jack, fully lowered, in a safe, dry,

childproof area.

Содержание TJ250














Отзывы: