background image

TJ250       

   01 

SAFETY PRECAUTIONS 

Important: Read these instructions carefully. Note THE SAFE 
OPERATIONAL REQUIREMENTS, WARNINGS AND 

CAUTIONS.

 

USE THIS JACK CORRECTLY AND WITH CARE FOR THE 
PURPOSE FOR WHICH IT IS INTENDED. Failure to do so may 
cause damage or personal injury. Retain THESE INSTRUCTIONS 
for future use. 

-

Ensure the jack is in sound condition and good working order. Take 
action for immediate repair or replacement of damaged parts.

-

Use genuine parts only. The use of improper parts may be 

dangerous.

-

Locate the jack in a suitable, well-lit working area. Keep working 
area clean and tidy and free from unrelated materials.

-

Use the jack on level and solid ground, preferably concrete. Avoid 
tarmacadam as jack may sink in.

-

Place wedges under the wheels of vehicle, but ensure the jack 
wheels are free to move and that there are no obstructions.

-

Ensure the vehicle handbrake is engaged, engine is switched off 
and transmission is in gear (or “PARK” if automatic).

-

Ensure minimum distance of 0.5m between vehicle and static 
objects such as doors, walls, etc., to allow for vehicle tilting.

-

Ensure there are no passengers in the vehicle and that all non-
essential persons keep a safe distance whilst the jack is in use.

-

Place jack under lifting points recommended by vehicle 
manufacturer (see vehicle hand book). Ensure lifting point is stable 
and centred on Saddle.

-

NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF 
THIS PRODUCT.

Содержание TJ250














Отзывы: