Cordless Jack Nurse-call
Quick Start Guide
Sensor Placement
RG13 / RG47 Bedgard:
Place on top of the mattress and under the bed sheet.
The pad can be placed anywhere between the shoulders to the hips depending
on the condition of the patient and how early you want the alert.
RG39 Under-mattress:
Place under the mattress across the width of the bed
at the lower back level. On profiling beds make sure it will not entrap the
mechanism when the bed is being adjusted.
For further guidance on placement, please refer to the pad positioning flyer.
RG11 / RG49 Seatgard:
Place mat on the relevant seat (on top of or under
a cushion), giving consideration to the position of the monitor and the least
intrusive method of installing the equipment.
RG59 Floorgard:
Place mat at or near to the area to be monitored such as a
doorway or side of the bed.
Receiver/Monitor Placement
The Jack should plug straight into any available nurse-call port with the switch
set according to mono/stereo operation.
General Operation
When a sensor pad is triggered, the jack activates a timed alarm output to
the nurse-call, which can only to be reset at the nurse-call point.
System Contents
Monitor
RG5
Cordless
Jack
Sensor
RG11 / RG49
Cordless
Seatgard
RG13 / RG47
Cordless
Bedgard
RG59
Cordless
Floorgard
RG39
Cordless
Under-mattress Pad
Transmitter
RG9
Cordless
Pad Transmitter
Applies to product codes:
R13-00011
|
R13-0002
|
R13-0003
|
R13-0004
|
R13-0005
|
R13-0006
|
R13-0007
|
R13-0008
