INSTRUCTIONS CABRI-30P/35P
Page13
SWING GATE OPENER
14. Fasten the nut tightly and loosen it for half round for motor supporting in rotating.
15. Fasten the motor front end to the front plate with the bolt (A) and nut (B) tightly.
Fully tighten the screw.
Figure 24
16. Use appropriate key to release the gear motor.
17. Try to push the released gate and make sure the motor can be manually moved
easily.
18. Make sure the motor front plate can be fastened on the gate to be installed
permenantly.
19. Use appropriate Key to fasten the gear motor again.
20. Loosen the plastic nut under the power cable of the motor end, and penetrate the
power cable through the nut and screw it up.
21. Connect the motor power cable as shown in Figure25.
22. Close the gear motor cover by tightening the two screws as shown in Figure26
Figure 25 Figure 26
CABRI-30P/35P
