Autoenterprise WALL COMPLEX, Руководство пользователя

Страница: 21 / 25

USER MANUAL WALL COMPLEX
21
CAUTION!
The use of explosive or flammable cleaning agents presents a fire or explosion
hazard.
Do not store flammable or explosive liquids near the charging station!
WARNING!
Charging station should always be powered off and disconnected from the
power grid during the maintenance and repair.
INFORMATION
It is recommended to carry out regular maintenance of the charging complex.
Only the manufacturer, an authorized service technician, or technically qualified personnel
may replace damaged charging station or its components.
In the course of operation the following maintenance are carried out:
• Visual inspection for overheating of equipment; check, pulling connections;
• Filter replacement;
•
Checking the efficiency of the inverter fans and the case fan;
• Identification of defective parts, assemblies, their repair and replacement.
The filters of the complex must be replaced at least once a year. When the charging complex
is operating in conditions of increased dustiness, it is recommended to carry out extraordinary
routine maintenance for preventive cleaning of the internal elements of the complex from dust
at least once every 3 months.
Preventive inspection of the charger should be carried out at least once every 3 months. To do
this, the charger must be disconnected from live circuits and its housing, contacts and vents
must be thoroughly cleaned of dust and dirt, and the quality of wire fastening must be checked.
Screws of terminal blocks and wire ends must be clamped, the wires must not have damaged
insulation.
The case fan must be cleaned of dust, visually inspected for damaged blades and check for ease
of movement. If necessary, replace the fan.
It is strictly forbidden to change or make changes to the structure of the complex in any way
without the written consent of the manufacturer!
All signs, stickers and pictograms placed on the complex must be visible and readable. Marks,
labels or pictograms that have been damaged or illegible must be replaced immediately. Please
contact the manufacturer to agree on such issues.