Autoenterprise WALL COMPLEX, Руководство пользователя

Страница: 18 / 25

USER MANUAL WALL COMPLEX
18
- remove the modem cover;
- install SIM-card;
- close the modem cover.
• Move the circuit breakers to the operating position (up).
•
Move the circuit breaker on the switch board to the operating position (up).
5 OPERATION
5.1 OPERATING MODES AND ELECTRIC VEHICLE CHARGING PROCESS
Information about the operating modes of the charging complex (the state of the connectors
and the charging parameters) are displayed on the display. Also, the display shows data about
software versions, modem number, station number in Autoenterprise billing, mobile network
status, etc.
The information shown on the display depends on the software version and may differ from
version to version.
After the supply voltage is applied, the station display
shows information about the software version and the
serial number of the modem.
In case of malfunctions in the operation of the charging
complex, you must inform the serial number of the
modem to the service center for diagnostics and
restoration of work.
In standby mode, the display shows information about the
status of the connectors.
In car charging mode, the LCD display shows information
about charging time, voltage level and current amperage.