background image

INSTRUCTION MANUAL CHARGE COMPLEX «K»

4

1. INTRODUCTION

CHARGE COMPLEX «K»

 

– is a high quality charging station (hereinafter referred to as «the 

complex»), which is made using  the latest solutions in the field of power electronics and 

technology, based on the modern components combined with the microcontroller signal 

processing technology, which ensures high efficiency, functionality and reliability of the 

charger.

This, together with the software and accessible interfaces, provides a 

flexible

 and 

productive

 

solution for electric vehicle charging that meets the highest quality standards.

The product is designed to control and convert the energy consumed from a three-phase 

AC 220/380V to DC voltage and to control the AC voltage for charging an electric vehicle 

battery.

The product is equipped with an intelligent microcontroller control system and 

communication devices that allow for the exchange of information with the electric vehicle 

and set the value of the charge current and voltage, according to the needs of the electric 

vehicle in real time.

2. KEY INFORMATION

2.1   INFORMATION ABOUT THE MANUAL

This manual describes how to operate the charger properly and safely. Be sure to follow 

the safety instructions given here, as well as any local safety regulations and general safety 

instructions.

Before you put the charger into use, make sure that the instructions, the «Safety» paragraph 

in particular, have been read through and understood completely. This manual is an integral 

part of the station and and should therefore be kept in its immediate vicinity.

2.2    WARNING SYMBOLS

Important safety instructions in this manual are marked with symbols. These safety 

instructions must be strictly adhered to. Always pay attention to them and follow the safety 

instructions to avoid accidents, personal injury or material damage.

WARNING!

Risk of injury or death

This symbol indicates instructions that must be followed to avoid injury, 

trauma or death.

Содержание CHARGE COMPLEX K Series





















Отзывы: