background image

INSTRUCTION MANUAL CHARGE COMPLEX «K»

16

The «DC Output» indicator light flashes green 

frequently when the vehicle is being charged in 

Chademo and CCS mode, and the LCD screen displays 

information about the time passed since the charging 

started, the charging current and the voltage.

The modes and text about the operation of the charging system on the LCD display depend 

on the software version and may vary from version to version.

In case of any error in the charging complex, to perform 

diagnostics and restore the operation, please, inform 

the service center about the factory number of the 

charging complex (the number of the charging complex 

is shown in the pic. «M006335»).

While the vehicle charging mode is active, station 

displays information about the charging time, voltage 

level and current value

AutoEnterprise

#1 : Charging

#1 : Charging

#1 : Ready

V:2.02.1642

0:00:50       

0:05:25        

M006335

42.8A/366V

0.4 kWh 

Plug in the connector

The operating modes of the charging complex are displayed on the LCD display, which, 

among other things, displays the following information: operating modes (ready to 

charge, the battery charge of the vehicle), the software and firmware version, the number 

of the complex, the status of the GSM network (signal strength, network status),  vehicle 

authorization process.

Содержание CHARGE COMPLEX K Series





















Отзывы: