6.
Voice Control (on compatible Mobile Devices) - Press the Multifunction Button (5) for 3
seconds to start voice control. You may have to wait for the confirmation tone, then clearly
say the necessary command (refer to the user manual of the connected device).
7.
Intercom Mode - When two Air units have been paired and both are switched on the intercom
connection is available. Press the Multifunction Button (5) once on one of the Bluetooth
helmet sets and a beep will signify that the intercom has been automatically connected.
Further Notes and Guidelines
•
Adjust your mobile device such that the selected ring tone can be clearly heard in the
helmet. For automatic call acceptance the ring tone length should not be too short to ensure
that auto acceptance is activated if set.
•
Not all mobile devices when switched on automatically connect with an Autocom Air. In this
scenario the connection can be activated through the mobile device menu.
•
Where a mobile device Bluetooth connection is available, the Autocom Air will automatically
try to connect to it when switched on. Some mobile phones will ask for a confirmation
(code 0000).
•
The Autocom Air is a low power (Class 2) device and can provide a range of up to 250m
(terrain and environment dependant) for bike to bike communication.
•
During navigation announcements or phone conversations the intercom connection to the
second helmet is blocked. After ending the phone call or navigation announcement, the
intercom will automatically be reconnected. A control signal indicates that the intercom has
been reactivated.
Содержание air
Страница 2: ......
