To Charge the Battery
1.
Plug the mains wall charger lead into the 2mm power socket on the air unit (8)+
2.
The display will show a RED LED while charging and will automatically change to trickle
charge upon completion and the RED LED will exti+
3.
Standard battery charge time 3 hours.+++
+
Never connect the charger if the battery is not connected to the Air unit.
++
If a battery has not been charged for a long time, the charging system may not start immediately. The
Air will regenerate the battery and the charging control light will flash until the battery is conditioned.
+++
Never wear the helmet when charging the battery.
+++
The charger should be switched off and the battery disconnected immediately if any component gets hot.
Autocom Air Operation
To Switch-on and Switch-off
1.
Switch On - Hold down the Multifunction Button (5) until you hear a beep.
2.
Switch Off - Hold down the Multifunction Button (5) until you hear a beep, and a RED LED is
momentarily seen on the unit.
Pairing to a Mobile Device
*Before installing/using your Autocom Air it is recommended that you pair it with your Bluetooth devices.
1.
Start with the Air unit switched-off and turn off all other Bluetooth devices not needed for the
pairing.
Содержание air
Страница 2: ......
