Auto-Trail Motorhome, Руководство пользователя

Страница: 21 / 69

DOMESTIC RM7361
Energy Selection
A = Energy selection switch
B = gas / electric thermostat
AC / DC
C = operating displays
Note:The refrigerator is equipped
to operate on mains power, DC or
liquid gas (propane / butane).The
desired power option is selected by
means of energy selector switch
(A). Energy selector switch (A) has
four settings: AC mains power, DC
(12V), Gas (liquid gas), OFF.
Electrical Operation (12V)
The refrigerator should only be
used whilst the engine is running,
otherwise the on-board-battery
would be discharged within a few
hours.
1 Set the energy selector switch (A)
to 12V.
2 Operating display “C”, 12V lights
“green”, the appliance is now
operating.
3 Use rotary switch (B) to regulate
the temperature in the main
refrigerator compartment.
If the operating display fails to light
up the device is not operating.
Mains Operation (230V)
This option should only be selected
where the supply voltage is 230V,
any different values may result in
damage to the appliance.
1 Set energy selector switch
(A) to 230V.
2 Operating display “C”, 230V
lights green, the appliance is
now operating.
3 Use rotary switch (B) to
regulate the temperature in
the main refrigerator
compartment.
If the operating display fails to light
up the device is not operating.
Gas Operation
1 Open the valve of the gas
cylinder.
2 Open the shut-off valve on
the gas supply.
3 Set energy selector switch
(A) to gas.
4 Set the rotary switch (B) to
“MAX” position.
5 Use rotary switch (B) to
regulate the temperature in
the main refrigerator
compartment.
The ignition process is activated
automatically, accompanied by a
ticking sound for approximately 30
seconds. On successful ignition, the
display LED (C) “GAS” lights
yellow.The refrigerator is now
functioning.
7. GAS: APPLIANCES
Refrigerator