Auto-Trail Motorhome, Руководство пользователя

Страница: 24 / 69

If insufficient voltage is
available or a fault occurs, the
LED of the main switch will
turn from green to red and
flash every second.
Once sufficient voltage is available
again or the fault has been solved ,
the LED of the main switch will
again go to constant green.
12 V direct current:
If you select 12 V DC manually, the
refrigerator will be powered by the
battery of your vehicle.
The LED of the main switch
will alert you if your vehicle's
engine is not running or if
insufficient voltage is available.
The LED of the main switch
will turn from green to red and
flash every second.
Once the engine is running or
sufficient voltage is available again,
the LED of the main switch will
again go to constant green.
P
OWERING WITH
G
AS
Powering with gas can be selected
both by the Auto mode and
manually.
Warning! - Flammable material
must be kept away from the
refrigerator.
• For selection of gas type, see the
information plate inside your
refrigerator.
• For the pressure regulator model,
see the information plate inside
your refrigerator and the table at
the back of this booklet.
• The type of gas container and its
location must be in compliance with
the most recent regulations. Ensure
that the unit is installed in a location
with good ventilation and make sure
that the ventilation openings in the
gas container storage location
remain open.
• The changing of the gas container
must be done outside in the open
air and out of reach of any possible
sources of ignition.
• It is prohibited to use gas to
power the refrigerator while you
are driving. If a road accident results
in fire, there is a danger of
explosion.
• It is prohibited to use gas to
power the refrigerator in the
vicinity of petrol
Auto Mode
The system will select gas operation
if:
• mains voltage (230 V) is
unavailable;
• the vehicle's engine is not running.
Once mains voltage (230 V) is
available again or the vehicle's
engine is running, the system will
switch to the available energy
source that has the highest priority.
If the system selects gas operation,
the ignition will be activated
automatically.The gas will flow to
7. GAS: APPLIANCES