![Power Gear 1510000120 Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/power-gear/1510000120/1510000120_installation-and-service-manual_1587251001.webp)
© 1/14 Power Gear #3010001345 Rev. 0C
Installation and
Service Manual
Room Slideout System
with Programmable
Control
Introduction
SYSTEM DESCRIPTION
Your Power Gear Slideout System is a rack and pinion design operated by a 12
Volt DC electric motor.
MAJOR COMPONENTS
· Inner rail assemblies are designed to support the room weight.
· The 12 Volt DC gearmotor will operate the room using power from the on-board
unit battery.
· Slideout systems are equipped with a manual override that allows you to extend
/ retract the room in the event of a loss of power.
· A specially designed control that gives the user full control of room movement, in
or out. The control has programmable stops that stop the motor when the room
is fully extended or retracted and the ability to detect faults for ease in
troubleshooting.
Installation
Installation & Service Manual
Room Slideout System with
Control Box 1510000120 and
1510000121
1
1
2
2-3
4
4
5
5
CONTENTS
Introduction
Installation
Installation Problems
Program Mode
Operation Mode
Preventative Maintenance
Fault Diagnostics
Troubleshooting
Override Modes
Wiring Diagram
6-7
7
P/N 81-1291) for proper installation of rail assemblies.
! "$ %&'(*''**+: ; ;
installation of room locks.
Control and touchpad Installation.
Refer to proper wiring diagram in back of manual
*< = >?* *=@ B; B !;
nents from the elements and being hit but is easily accessible for service.
+<! ! B;?(@<F =
in view of slideout room and have a minimum depth of 1” inside the wall.
Cut 2 7/8“ wide x 1 3/4” high rectangular opening in wall to mount the
touchpad.
3. Route and attach touchpad harness to where touchpad will be mounted.
B;B+@H!B=; !!<
4. If using room locks, route and attach room lock harness from control to
room lock.
5. Route and attach the motor and sensor harness from the control box to
the slideout room motors.
6. Route and attach the proper gauge wire from the control to the chassis
battery.
WARNING
S
!
Always keep away from the
slide-out room and rails when
the room is being operated. The
gear assembly may pinch or
catch on loose clothing causing
personal injury
Failure to follow these instruc-
tions could result in serious
injury or death