Auto-Sleepers Topaz, Руководство пользователя

Страница: 63 / 108

9-13
FITTED EQUIPMENT
230 V mains power supply indicator
The icon signals that 230 V mains power
supply is available.
Note: Display is only possible in combination
with a heating system Combi E CP plus
ready which contains additional heating
elements for electrical mode.
WARNING: In the event of a warning, a
warning symbol appears in order to signal
that an operating parameter has reached
an undefined condition. In this case the
device concerned continues to operate.
As soon as the operating parameter is
within the target range again, this symbol
goes off again automatically.
Read out code of warning
- Select icon with rotary push button.
- Tap rotary push button.
The current warning code will be
displayed. The cause of the warning can
be determined using the fault list and
eliminated.
W = Warning
42 = Error code
H = Device
H = Heating system
A = Air conditioning
system
Cause eliminated / return to setting level
- Tap rotary push button.
Cause not eliminated / return to setting
level
- Press the return button.
Note: In this case the warning is not
acknowledged on the control panel, and the
warning symbol remains. The control panel
remains in warning status. Other connected
devices can be operated.
Fault
In the event of a fault, the control panel
immediately jumps to the “Fault” menu level
and displays the fault code of the fault.
E = Fault
41 = Fault code
H = Device
H = Heating system
A = Air conditioning
system
Cause eliminated / return to setting level
- Tap rotary push button.
- The respective unit is restarted.
Note: This can take several minutes because
of internal after-run of connected units.
If the cause has not been remedied, the fault
will occur again and the control panel will
jump to the “Fault” menu level again.
Cause not eliminated / return to setting
level
- Press the return button.
Note: In this case the fault is not
acknowledged in the control panel, and the
warning symbol remains. The device remains
in fault state. Other connected devices can
be operated.
Technical data
Display LCD, monochrome, with
background lighting
Operating -25
°
C to +60
°
C
temperature
range
Storage -25
°
C to +70
°
C
temperature
range
Interface TIN bus
Power supply 8 V - 16.5 V
Power max. 60 mA (100 %
consumption background lighting)
6.5 mA - 7 mA (Standby)
Standby current 3 mA (Off)
Maintenance
This unit is maintenance free. In order to
clean the front panel, use a damp, non-
scouring cloth. If this is not sufficient, use a
neutral soap solution.