manualshive.com logo in svg

Auto-Sleepers Topaz, Руководство пользователя

Поделиться
Скачать
Auto-Sleepers Topaz Скачать руководство пользователя страница 102

12-6

SERVICE DETAILS

check for leaks and satisfactory draining of
water from sinks etc.

Couplings and Fluids

Check that the appropriate markings are
used - blue for fresh water, grey for waste
water. Ensure a sealing off cover is supplied
for each coupling.

Check that filler positions are designated
“petrol”, “diesel” or “water” as appropriate.

Toilet Waste Tank

Check that any fixed tank intended to receive
discharge from a toilet is fitted with either a
level or full indicator.

SECTION 10 - ELECTRICAL
SYSTEMS

Extra Low Voltage 12 Volts (excluding
vehicle)

Battery/ies:

•

Check battery/ies for condition.

•

Check connections, wires, fuses and
relays appertaining to the habitation
electrics.

Wiring:

•

Examine all visible wiring.

•

Check all connections and joints are
sound and satisfactory.

Fuses/Fuse Holders:

•

Ensure that fuses and fuse holders used
to protect the habitation electrics are
satisfactory and that fuse ratings are
compatible with the circuit appliances
being protected.

Appliances:

•

Inspect all appliances for damage, signs
of overheating and secure fixing.
Function test all appliances.

Mains 230 Volt System

It is recommended that the inspection and
certification of the 230 volt system be carried
out by a qualified electrician who is an
approved contractor of the NICEIC (National
Inspection Council for Electrical Installation
Contracting) or a member of the Electrical
Contractors Association.

SECTION 11- VENTILATION

High Level

Check all high level ventilators, including roof
lights, are free from obstruction and allow a
free flow of air.

Low Level

Check all low level ventilators are free from
obstructions and allow a free flow of air. If the
ventilator is manually adjustable then ensure
the mechanism is free and operating
correctly.

Содержание Topaz













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды