manualshive.com logo in svg

Auto-Sleepers Topaz, Руководство пользователя

Поделиться
Скачать
Auto-Sleepers Topaz Скачать руководство пользователя страница 4

1-2

WARRANTY

AUTO-SLEEPERS WARRANTY

Warranty Registration

The supplying dealer’s representative and
the purchaser must sign the declaration in
the Warranty/Service book to verify that the
dealer has explained the warranty terms and
conditions and that the purchaser
understands them.

The dealer must then register the sale on the
Auto-Sleepers warranty system to activate
the cover.

Warranty Terms and Conditions

For full details of the warranty terms and
conditions, please refer to the Warranty/
Service handbook supplied with your Auto-
Sleeper.

Contact Us

You may contact us at:

Auto-Sleepers Limited,
Orchard Works,
Willersey,
Nr Broadway,
Worcestershire
WR12 7QF
England

Telephone: 01386 853338
Fax: 01386 858343
E-mail: [email protected]
Internet: www.auto-sleepers.co.uk

To deal with your enquiries more efficiently,
always quote your vehicle’s production
number, which can be found written on a
label in the glovebox and is also on the
bottom edge of the Type Approval plate fitted
to the driver or passenger door pillar.

Содержание Topaz













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды