Auto-Sleepers FORD TRANSIT CUSTOM AIR 2022 Скачать руководство пользователя страница 45

Страница: 45 / 80

FITTED EQUIPMENT

SECTION

Fault

Possible Cause

Proposed Fix

No 230 volt

output from PSU

Connecting lead between the site and
Leisure Vehicle not connected

Check and connect lead as per 5.1C

Check also input connector at the base

of the EC328PSU

RCD switched off

Reset RCD as per 5.1D

RCD not operating correctly

Check supply polarity; if the RCD
continues to fail contact your Dealer, as
there is probably an equipment or wiring

fault.

MCB switched off

Reset MCB by switching OFF (down
position) then back ON (up position), if

the MCB continues to fail contact your

Dealer, as there is probably an

equipment or wiring fault.

No or deficient supply from site

Contact site Warden for assistance

Other fault

Contact your Dealer

Reverse Polarity
light is illuminated
on PSU

Mains Supply reversed?

The reverse polarity light is designed to

illuminate when the Live and
Neutral supply has been reversed /

crossed over. If the light illuminates

there is a problem with the site supply or
the cable connecting the supply to your
vehicle. The light is designed to work
on UK electrical supplies (where the

neutral conductor is connected

to earth at the sub station). If you are

using your vehicle outside the
UK this light may illuminate when no
fault exists. In these cases
consult the site warden for advice.

Generator being used

The Reverse Polarity warning light is on
when using my Generator. This is a

normal side effect when using some

types of generator. Instead of con

necting the neutral conductor to earth,

some generators centre tap the earth

connection making both neutral and
live conductors 110v above earth. This
110v difference causes the neon polarity

indicator to illuminate. In most cases it is

still safe to use the generator, but please
consult the generator handbook for

further information.

Common Fault Table

Содержание FORD TRANSIT CUSTOM AIR 2022

















































































Результаты поиска

Содержание FORD TRANSIT CUSTOM AIR 2022

Отзывы:

Бренды по названию

Популярные бренды

Auto-Sleepers FORD TRANSIT CUSTOM AIR 2022, Руководство пользователя

Результаты поиска

Содержание FORD TRANSIT CUSTOM AIR 2022

Отзывы:

Бренды по названию

Популярные бренды