manualshive.com logo in svg

Auto-Sleepers FORD TRANSIT CUSTOM AIR 2022, Руководство пользователя

Поделиться
Скачать
Auto-Sleepers FORD TRANSIT CUSTOM AIR 2022 Скачать руководство пользователя страница 26

26

CONNECTION OF SERVICES

07

SECTION

The names and addresses of Approved 
Contractors in any locality (there are over 
10,500 in the UK) can be obtained from:

NiCEIC
Warwick House
Houghton Hall Park
Houghton Regis
Dunstable
LU5 5ZX

Telephone: 0333 202 5721

Email: [email protected]

The names and addresses of members of the 
Electrical Contractors’ Associations can be 
obtained direct from:

ECA

Rotherwick House
3 Thomas More Street
London
E1W 1YZ

Telephone: 020 7313 4800

WARNINGS: Current consumption in the 
campervan must not exceed 16 amps or the pitch 
permitted maximum if this is less than 16 amps.

It is dangerous to attempt modifications 
and additions yourself. Never allow 
modification of electrical systems and 
appliances except by qualified persons. 
Lampholder-plugs (bayonet-cap adaptors) 
should not in any circumstances be used.

CAUTION: 

Electrical heaters have the 

potential to draw 8 amps at 2KW. It is, 
therefore, advisable on two loads (items) 
greater than the supply as this may cause 
an overload and the circuit breaker to trip.

OVERSEAS CONNECTIONS

Note: 

Connection to a mains voltage supply 

OVERSEAS requires particular attention.

Care must be taken when connecting 
supplies abroad since the supplies 
can be of REVERSE POLARITY.

The significance of REVERSE POLARITY 
is that when equipment is switched off 
it may not be electrically isolated. 

The only certain way of making 
equipment safe is to unplug it.

If it can be achieved, it is preferable to 
connect live to live, and neutral to neutral 
to maintain full electrical protection.

Содержание FORD TRANSIT CUSTOM AIR 2022

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды