8
5
CONTROLS & FUNCTIONS
Power
Button
Paper Roll
Cover
Paper Line
Feed Button
Printer Battery
Charging Port
Tester
Communication
Port
Print Button
Power LED
Green = Ready
Amber = Recharge
Battery
Printer Ready LED
Green = Ready
Amber = Replace Paper Roll
Flashing Green/Amber = Line
Feed On
CHARGING THE BATTERY
1. Plug the battery charger into the printer charging port located
in the smaller rubber boot hole on the right side of the printer.
2. Plug the charger into an AC power outlet. (100 – 240 VAC,
50/60 Hz)
3. The LED on charger will be red indicating the battery is being
charged.
4. The LED on the charger will turn from red to green when the
battery is fully charged. Typical recharge time is about 2
hours.
The “Power” LED will turn from green to amber when
the internal printer battery needs to be charged.
