4
9
Installing the Printer to Your Hand Held Tester
1. Remove the printer from the rubber boot.
2. Slide printer over the top of the hand held tester.
3. Install rubber boot around printer and hand held tester.
REPLACING THE BATTERY
1. Remove the rubber boot.
2. Turn printer over and slide the battery out to the left.
3. Install the replacement battery by orientating the battery so
that the arrow on the battery points to the right. Slide battery
to the right to install.
4. Replace the rubber boot.
If you notice that the battery life is becoming shorter
between battery charges, the battery may be coming to
the end of its useful life.
Arrow on Battery
Replacement battery: Canon Camcorder Li-Ion BP-511 or equivalent.
The battery must be properly recycled. Do not puncture, burn, or
dispose of in trash. Recycling services available at many battery
supply stores.
