22
3
Setup cont.
Select the rating from
CCA, MCA, CA, AH.
>DEFAULT BATTERY
RATING: CCA
USE +/-.
'Y' TO SELECT
>SET DEFAULT CCA
AS: 600
USE+/-
Y TO SELECT
DO YOU WANT TO
DISPLAY MEASURED
BATTERY CAPACITY
'N' OR 'Y'
You can also select the default rating
to be the last entered CCA value or a
particular amount such as 600 CCA.
If 'Y' is chosen, the measured battery
capacity will be displayed on the
battery test result screen and print out.
If 'N' is chosen no measured battery
capacity will be displayed or printed.
>USE TEST RESULT
NEAR END OF LIFE
USE+/-
Y TO SELECT
PRINTOUT OPTION
AC-14/PR-12
USE +/-.
'Y' TO SELECT
CHANGE THE TIME?
04:01PM 11/19/11
'N' OR 'Y'
DO YOU WANT TO
ENTER STORE INFO
'N' OR 'Y'
To toggle battery test results between
"GOOD" or "BAD" only and "NEAR
END OF LIFE", use + or - to change
setting then use 'Y' to select.
To print to an Auto Meter stand alone IR
printer choose "AC-14/PR-12". To print
to the Auto Meter high speed PR-16
printer using the Auto Meter XTC-160
charger/tester and IR-1 printer interface
choose "XTC-160/PR-16. To print to
a network printer using the POSI-160
choose "Print Center".
Press 'Y' to change the time, or 'N' to
continue.
Press 'Y' to enter or change the store
address for use on print outs or 'N' to
continue.
TABLE OF CONTENTS
Specifications -------------------------------------------------------3
Safety -----------------------------------------------------------------4
Cause of Battery Failure -----------------------------------------4
Inspection and Visual Check ------------------------------------5
Controls and Functions -------------------------------------------6
Maintenance --------------------------------------------------------7
Clamp Replacement ----------------------------------------------7
Battery Replacement ---------------------------------------------8
Sections
1.
Hook Up --------------------------------------------------------9
2.
Battery Test ----------------------------------------------10-12
3.
Starter Test -----------------------------------------------13-16
4.
Alternator Test -------------------------------------------17-18
5.
Other Menu Items
Review Tests -------------------------------------------19
Printing Test Results ---------------------------------20
Voltmeter ------------------------------------------------21
Setup -----------------------------------------------------21
Warranty Information ---------------------------------23
Contact Information-----------------------------------24
Note:
The BVA-260 checks and load tests 6 volt and 12 volt
Batteries and tests the starting and charging systems on 12
volt and 24 volt systems. The following examples illustrated
are for a 12 volt system. The BVA-260 automatically identifies
the appropriate voltage and displays the menu selection and
instructions needed for that system.
