14
11
BATTERY TEST (cont.)
If the reading is below 7.2 Volts you will get the following:
Surface charge removed if
detected.
Wait for test results.
Bar at the bottom of the screen will
show the tests progress.
The BVA-260 serial number and test number are displayed to help
reference the test to the print out.
SUMMARY SCREEN
Wait for instructions before cranking engine.
If the current draw is between 75A & 250A (for gas powered engines) the starting
system is likely good and the following screen will appear
If the current is under 75A a solenoid connection or corrosion problem is likely and the
following screens appear.
STARTER TEST cont
>START ENGINE
'N' TO CANCEL
#40 12V START
CURRENT 200A
- PASSED -
'Y' TO CONTINUE
The BVA-260 will test the starting
system. A bar at the bottom of
the screen will show the tests
progress.
TESTING STARTING,
SYSTEM
PLEASE WAIT ...
Press the (-Down) key to dis-
play the next screen. Press Y or
N to go to the main menu.
#73 12V START
CURRENT 60A
- FAILED -
'Y' TO CONTINUE
TESTING BATTERY
PLEASE WAIT...
S#22010 T#32
Confirm that the inputs are
correct. Press “Y” if they are
correct. The test will start.
Press “N” to re-enter battery
type, temp, and rating.
Press the (+Up) or (-Down) key to
cycle through the battery types.
Press 'Y' when it matches the
type of battery you are testing.
BATTERY TYPE OPTIONS:
STARTING STANDRD
STARTING AGM
DEEP CYCLE AGM
DEEP CYCLE STANDRD
>IS THIS A 6V
BATTERY?
'N' OR 'Y'
REMOVING SURFACE
CHARGE...
S#22010 T#32
STARTING STANDRD
BATTERY TEMP 70°F
RATED CCA = 600
'N' OR 'Y'
CHOOSE BATT TYPE
STARTING STANDRD
USE +/-
'Y' TO CONTINUE
