Auto Meter BVA-260, Руководство оператора

Страница: 12 / 12

12 13
After the Digital Pulse Load Test is completed results similar
to one of the following sample screens will appear.
Battery passes
testing. Return to
service.
Charge battery and place into
service.
Battery did not have a sufficient
charge for a Digital Pulse Load
Test. Charge and retest battery.
Battery passes testing and is near
end of life. Battery is ok for mild
climate. May not start vehicle in
hot or cold conditions.
Battery did not have
sufficient remaining
capacity to pass tests.
Battery should be replaced
immediately.
BATTERY TEST (cont.)
3
#32 12V BATT.
GOOD BATTERY.
12.84V CHG 100%
MEAS CCA 610
#33 12V BATT.
BAD BATTERY
12.45V CHG 75%
MEAS CCA 400
#34 12V BATT.
GOOD NEEDS CHARG
12.24V CHG 50%
CK START-CHG SYS
#35 12V BATT.
CHARGE & TEST
12.06V CHG 25%
ADDL TEST REQ'D
#36 12V BATT.
NEAR END OF LIFE
12.80V CHG 100%
MEAS CCA 450
STARTER TEST
The starter test measures the amount of current needed to crank the
engine and provides the initial information to diagnose and/or further test
the starting system if necessary
Symptomatic Check before Proceeding:
Check all cables and connections.
Check the battery for corrosion and dirty terminals.
Check starter/solenoid for visual defects.
Check the ignition switch and any magnetic switches for
loose or bad wiring, loose mounting, or connections and
sticking contacts.
Check for starter/solenoid noise. The type of noise or the
lack thereof can help in diagnosing the problem.
Does the solenoid click, but the starter does not turn? Does
the starter turn, but not engage the flywheel? Is the starter
sluggish?
Note: A remote starter switch can be used to bypass the ignition switch
and crank the engine from under the hood. This way the sounds of the
starter can be heard.
STARTER TEST
Press (N Esc.) to return to main menu. Select Starter Test then press (Y
Enter).
Use the (+Up) and (-Down)
to move cursor to the
desired test
Press (Y) and tester prepares
for the starter test. Bar at
the bottom of the screen will
show the progress.
BATTERY TEST
>STARTER TEST
ALTERNATOR TEST
REVIEW/PRINT
PREPARING FOR
STARTING TEST