8
© 2013 Directed. All rights reserved.
Basic Commands (Direct Access)
Arm
Press
and
release
The alarm arms, doors lock (if connected), and the siren chirps and
parking lights flash once. The arm LED and beeps play to confirm. If
valet mode* is on, the doors lock and the arm LED and a fault tone
plays. Exit valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
remote will emit a trigger zone fault report**, the arm LED and a fault
tone plays.
To Arm and Panic
Press
and
hold
The alarm arms (or locks in valet) and, after 2 seconds, sounds
the siren and flashes the parking lights. The LED’s flash and siren
tones play to confirm.
Press
the
or
button to stop the out-
put.
Disarm
Press
and
release
The alarm disarms, doors unlock (if connected), and the siren chirps
and parking lights flash twice. The disarm LED and beeps play to
confirm. If valet mode* is on, the doors unlock and the disarm LED,
and fault tones play.
An alarm report** will replace the disarm output if the alarm was trig-
gered; the siren will chirp 4 or 5 times, and the disarm LED and 4 or
5 fault tones play to alert of the report.