11
© 2013 Directed. All rights reserved.
Sensor Bypass
At any time while the system is armed,
press
and release the
button on the remote and then within two seconds, press and hold
the
button for one second to enable the sensor bypass mode.
Repeating the previous steps incrementally bypass sensor operations
and are confirmed as follows:
s
Warn-away Bypass:
The parking lights flash 2 times. The arm
LED, 1 beep and 1 fault tone play to confirm. Sensors will be
activated for full trigger levels of impact only.
s
Warn-away & Full Trigger Bypass:
The parking lights flash 3
times. The arm LED, 1 beep and 2 fault tones play to confirm.
Sensors will not be activated for any level of impact.
s
Sensor Bypass Off:
The parking lights flash 1 time. The arm LED
and 1 beep play to confirm. Sensors are fully operational.
Note
Sensor bypass can only be performed when the system is
armed. Perform arm command any time to turn sensor by-
pass off.
