Page 35 (49)
LoLo / Lo / Hi / HiHi
Warning/Alarm limits.
Note!
Leaving the field empty indicates no event.
Delay
Select a suitable persistence delay time in seconds before the event is
triggered.
Repeat
After the elapsed repeat time in seconds, the channel will re-enable the
buzzer unless the channel is acknowledged. The repeat timer starts when
the buzzer is silenced.
Make sure the connected analog sensors match the input channels in the I/O
Cabinet. The input channels accept 4-20mA and 0-10V signals. The Sensor Min
and Sensor Max configuration shall match the actual sensor min and max