Auto Crane HC-5 NEXSTAR, Руководство пользователя, Страница: 26 / 88

26
NexStar Operation
HC-7X NEXSTAR
Release the trigger, then depress and hold the trigger again to select Auto Stow. The display will return
to the main screen and will display “AUTO STOW ACTIVE” in a blue Info-Box. If “AUTO STOW ACTIVE”
does not display, try releasing the trigger, the depressing and holding it again. If Auto Stow still does not
initiate, check to ensure the initial conditions are met.
Once Auto Stow is initiated, the boom will move towards the home position. When the boom is in its final
position, the main screen will display a green Info-Box and the boom will stop moving.
If the boom was rotated a full turn clockwise and is past the home position when Auto Stow is initiated,
the boom will rotate the full turn, counterclockwise, to unwrap the cable/hoses running up through the
base.
To pause the Auto Stow process, release the trigger. To resume motion, depress
and hold the trigger. If the operator attempts any manual boom control during
Auto Stow, the sequence will be cancelled, and the initial conditions will need to
be met again.
Keep constant watch on the crane as it moves through the cycle. If the crane
needs to be stopped during automatic movements, release the trigger.
NOTICE
!
CAUTION